manualshive.com logo in svg

Amit TE1088, System Manual, Page: 44 / 135

Share
Download
Amit TE1088 System Manual Download Page 44

Chapter 3 - Using the Web Configuration Server

Set the following parameters:

Table 12: Setup Wizard – PPPoE Parameters 

Parameter

Description

LAN IP Address

The local IP address of the device.

The default IP address is 192.168.254.253. To change the IP

address enter a new value.

Account

The account provided by the service provider.

A string of up to 53 printable characters.

The default is an empty field.

Password

The password provided by the service provider. If you do not

want to change the password, leave empty. At initial entry,

you are required to enter a password.

A string of up to 53 printable characters.

Primary DNS

The DNS provided by your ISP. To use a specific DNS, enter

a specific address. Leave the default 0.0.0.0 setting to 

automatically assign the parameter.

Secondary DNS

The backup DNS provided by the service provider. (optional)

‘

PPTP

Figure 12: Setup Wizard – PPTP 

Using the Web Configuration Server

30

Summary of Contents for TE1088








































































































































Reviews:

No comments