manualshive.com logo in svg

Amit TE1088, System Manual, Page: 52 / 135

Share
Download
Amit TE1088 System Manual Download Page 52

Chapter 3 - Using the Web Configuration Server

The Setup page for Dynamic IP Address includes the following parameters:

Table 16: Dynamic IP Address Parameters

Parameter

Description

Host Name 

Optional - Some ISPs require a host name, for example,

Home.

A string of maximum 39 characters.

WAN's MAC Address 

The gateway's pre-configured MAC Address.

„

Clone MAC - Click to replace the Gateway's WAN MAC 

Address with the PC's MAC Address. 

„

Restore MAC - When Clone MAC is activated, the button 

changes to Restore MAC, to enable to restore the unit's

pre-configured MAC Address.

Renew IP Forever

When enabled, this feature will automatically renew your IP

address when the lease time expires, even if the system is 

idle.

NAT

Enable/Disable - When disabled, the gateway functions as a

regular router as opposed to a NAT router. 

3.6.1.3

Dynamic IP Address with Road Runner Session 
Management

Figure 20: Primary Setup - Dynamic IP Address with Road Runner Session Management

Using the Web Configuration Server

38

Summary of Contents for TE1088








































































































































Reviews:

No comments