manualshive.com logo in svg

Amit TE1088, System Manual, Page: 55 / 135

Share
Download
Amit TE1088 System Manual Download Page 55

Basic Setting 

3.6.1.5 PPTP 

Some ISPs require the use of PPTP to connect to their services.

Figure 22: Primary Setup - PPTP 

The Setup page for PPTP includes the following parameters:

Table 19: PPTP Parameters 

Parameter

Description

IP Mode 

Select one of the following options:

„

Dynamic IP Address (this is the default setting)

„

Static IP Address 

My IP Address

The private IP address assigned by your ISP. This parameter

is enabled only for Static IP Address mode.

My Subnet Mask

The private subnet mask assigned by your ISP. This

parameter is enabled only for Static IP Address mode. 

WAN Gateway IP 

The WAN Gateway IP address. This parameter is enabled

only for Static IP Address mode.

Address/Name

The IP address/Name of the PPTP server. 

PPTP Account 

The user account assigned by your ISP. 

A string of maximum 53 characters.

Connection ID 

Enter the connection ID if your ISP requires it (optional).

NG System Manual

41

Summary of Contents for TE1088








































































































































Reviews:

No comments