Model
SE578A
Service
Replacing Parts
Parts
4. Pedal Arm Assembly
Rev.
1
2
3
4
Procedures：
1.
Disassemble Connecting Arm first and
use Phillips head screw driver to
release M5x10mm Phillips Head
Screw to take apart Pedal Arm Cover,
as shown in figure 1.
2.
Use 8mm Allen wrench and 14mm to
release 3/8
"
x2-1/4
"
Socket Head Cap
Bolt, 3/8
"
x19x1.5T Flat Washer and
3/8
"
x11T Nyloc Nut which secure
Pedal Arm and Bushing Housing
together, and take Pedal Arm apart, as
shown in figure 2.
3.
Use 12mm open end wrench and Allen
wrench to release 5/16
"
x 15mm Hex
Head Bolt and 5/16
"
x35x1.5T Flat
Washer and take Bushing Housing
apart, as shown in figure 3.
4.
Use C-ring pliers to release ψ17
C-ring in order to take Slide Wheels
apart, as shown in figure 4.
5.
Reverse above procedures to resume
Pedal Arm.
