Model
SE578A
Service
Replacing Parts
Parts
9. Flywheel and Drive Belt
Rev.
1
2
3
4
Procedures：
1.
Follow the procedures to take Idler
Wheel Assembly.
2.
Adjust the resistance to 20 with
Console and release the steel cable, as
shown in figure 1.
3.
Use 15mm wrench to loosen
3/8
"
-UNF26x9T nut, which secures the
Flywheel on the Mainframe, to take
apart the Flywheel and Drive Belt, as
shown in figure 2, 3
4.
To resume parts, reverse above
procedures and adjust the Belt in the
center of the Drive Pulley, as shown in
figure 4.
