Model
SE578A
Service
Replacing Parts
Parts
5. Console Mast
Rev.
1
2
3
4
Procedures:
1.
Follow the procedure to disassemble
Swing Arm.
2.
Slap Console Mast Cover to separate it
from left and right Side Cases.
3.
Use 14mm wrench to release 3/8
"
x3/4
"
Hex Head Bolt, 3/8
"
x23 x2T Curved
Washer, 3/8
"
x2-1/4
"
Hex Head Bolt
and 3/8
"
x2T
Split Washer which
secure Console Mast, as shown in
figures 1, 2.
4.
Separate Console Mast and Mast
Cover from the Mainframe and pull
out Computer Cable and Incline
Controller Cable out of Console Mast.
Separate Mast Cover from Console
Mast, as shown in figures 3, 4.
5.
Reverse above procedures to resume
Console Mast.