Model
SE578A
Service
Replacing Parts
Parts
2. Swing Arm Assembly
Rev.
1
2
3
4
Procedures：
1.
Use Phillips head screw driver to
release 3.5x12 Sheet Metal Screw
which secure front and rear Handle Bar
Covers, as shown in figure 1.
2.
Disconnect upper and lower
Handle
Wires, as shown in figure 2.
3.
Use Phillips head screw driver to
release M5x15mm Phillips Head
Screws and 3.5x12 Sheet Metal Screws
which secure left and right Connecting
Arm Covers A, as shown in figure 3.
4.
Release M5x15mm Phillips Head
Screws and 3.5x12 Sheet Metal Screws
which secure left and right Connecting
Arm Covers B, as shown in figure 4.