48 - EN
Other
Symptom
Cause
Solution
Page
There are wa-
ter drops on the
underside of the
SpaLet
®
seat.
Water drops from the spray land on
the underside of the SpaLet seat.
Frequently wipe the water drops.
Additionally, sitting further back on
the seat when using the spray will
lessen splashing.
-
The seat unit is
unstable.
The seat unit is not locked in place. Press down the seat unit to ensure
that it is firmly locked in place.
42
The mounting plate is loose.
Tighten the mounting nuts.
-
A gurgling sound
comes from the
SpaLet seat
●
Power plug is
connected to
an outlet
●
Nozzle spray
has stopped
This is not a malfunction.
This is the sound of the motor operating during normal SpaLet seat op-
eration. If the water pressure and nozzle position can be adjusted prop-
erly, then there is no problem.
-
The power indi-
cator is flashing.
Water supply is not connected to
the SpaLet seat due to a suspend-
ed water supply or closed water
shut-off valve.
After restoring the water supply,
open the water shut-off valve and
test operation.
If the power LED is still flashing,
then disconnect the power plug
and have the SpaLet seat ser-
viced
.
7
Several functions are malfunction-
ing.
If the power LED flashes after the
power has been turned off, this
indicates that the SpaLet seat is
damaged.
Disconnect the power
plug from the outlet and have the
SpaLet seat serviced
.
-
An anti-freezing heater is attached
to the water supply hose or other
pipe.
Turn off the anti-freezing heater.
When the water temperature ex-
ceeds 104°F, the safety system in
this product stops operation.
-
Summary of Contents for Advanced Clean 3.0 SpaLet
Page 54: ...51 EN ...