36 - EN
n
1
Open the seat lid and SpaLet
®
seat.
n
2
Press the [Nozzle Cleaning] button and
open the nozzle shutter.
* The back nozzle will stretch out and push up the
nozzle shutter.
[Nozzle Cleaning]
n
3
Pull the nozzle shutter down toward you
with both hands to remove.
n
4
Clean the removed nozzle shutter.
●
Use a soft, damp cloth to clean.
[CAUTION]
●
Do not wipe parts with a dry cloth or toilet paper.
●
Do nut scrub with a toothbrush.
* Doing so may cause damage.
Removing the Nozzle Shutter
Assembling the Nozzle Shutter
n
1
Attach the two lugs of the nozzle shutter
into the slot in the shutter base from below.
* If the shutter base is closed, perform the procedure
described in the "Opening the Nozzle Shutter" section.
Click
Slot
Lug
Shutter base
Attach so that the triangle
mark faces forward.
[Enlarged View of the Lug]
n
2
Press the [Stop] button to return the noz-
zle shutter to the original position.
[CAUTION]
●
Press until it clicks into place.
Make sure the shutter is correctly installed.
●
Installing the shutter in the incorrect vertical orien-
tation can cause malfunctions such as no nozzle
extension or no shutter opening.
●
Do not apply excessive force.
* Doing so may damage the part.
Summary of Contents for Advanced Clean 3.0 SpaLet
Page 54: ...51 EN ...