41 - EN
Flashing Battery Level Indicator on the Remote Control
The battery LED on the home screen flashes when the batteries are low. (
+
Page 21)
[CAUTION]
●
Install batteries in the correct orientation of polarity
as illustrated on the remote control display.
●
Do not use a mix of new and old batteries.
●
Use alkaline batteries only.
●
Be careful not to touch any switches on the remote
control when replacing batteries.
n
1
Lift the remote control out of the holder.
Holder
Remote Control
n
2
Remove the back cover and replace with
two new 1.5-V AA alkaline batteries.
* If the back cover is difficult to remove, use a flat-
blade screwdriver or similar tool to release the lock.
Back cover
Lock
Alkaline batteries
n
3
Return the remote control into the holder.
Replacing Remote Control Batteries
(Reference)
●
The battery LED will flash when the batteries are low. This LED normally does not appear.
●
The batteries supplied with the SpaLet
®
seat are used for operation checks at the factory, and so it has a shorter
service life than typically available batteries.
●
Batteries may become fully discharged before the battery LED flashes depending on the size of the room and
material/color of the walls, particularly with darker colors.
●
When replacing batteries, wait for the battery LED to disappear after the batteries have been removed before insert-
ing the new batteries. This is because the battery LED may remain flashing after batteries have been replaced.
Battery LED
Summary of Contents for Advanced Clean 3.0 SpaLet
Page 54: ...51 EN ...