9 - EN
Seat sensor switch
(Built into the seat unit)
Operate the Spray
n
1
Roll up your sleeve and set
your arm on the SpaLet
®
seat.
*
The SpaLet seat is equipped with a seat sensor
that detects the presence of someone sitting on
the SpaLet seat.
The Spray and dryer will not function if the sensor
is not triggered.
*
Allow the spray to operate for approximately 30
seconds to bleed air in the water line during initial
use.
n
2
Press the [Cleansing] button.
*
At this time, water will discharge from around the
nozzle as a preliminary operation.
n
3
Place a hand above the noz-
zle tip to block the sprayed
water.
n
4
Press the [Stop] button to
stop the SpaLet.
Preparation and Checks Before Use
STEP
3
Summary of Contents for Advanced Clean 3.0 SpaLet
Page 54: ...51 EN ...
