44 - EN
Back Cleansing, Back Cleansing-Mild, and Front Cleansing
Symptom
Cause
Solution
Page
Nozzle spray
does not dis-
charge.
Water shut-off valve is closed.
Turn the open/close knob 180°
counterclockwise.
7
The strainer is clogged.
Clean the strainer.
40
The water pressure is low. Water
pressure is set to the lowest set-
ting.
Press the [
+
] side of the [Spray
Strength] button.
15
Seat sensor is not triggering.
Sit on the SpaLet
®
seat.
21
The temperature of the water sup-
plied to the SpaLet seat is too high.
This is not a malfunction. When the
water temperature exceeds 104°F
due to anti-freezing pipe heaters or
similar, the nozzle spray does not
discharge until hot water is removed
from the pipe. In this scenario, drain
the hot water from the pipes by
nozzle drain the SpaLet seat and
then try pressing the button for the
desired cleansing function. If this
phenomenon occurs repeatedly,
then review the usage of the anti-
freezing pipe heater.
-
It takes longer
than usual for the
nozzle spray to
discharge.
The water temperature is not set to
an appropriate temperature.
This is not a malfunction. When
water temperature is low such as in
winter, it may take time to prepare
warm water before the nozzle spray
discharges.
-
The preparation
time before the
nozzle spray dis-
charges may be
longer than mod-
els you have used
in the past.
When purchasing a replacement model, the preparation time before the
nozzle spray discharges may be longer due to changes in product de-
sign.
This is a feature of the product and is not a malfunction.
-
Summary of Contents for Advanced Clean 3.0 SpaLet
Page 54: ...51 EN ...
