American Standard Advanced Clean 3.0 SpaLet User Manual Download Page 33

Page: 33 / 56

30 - EN

The seat lid can be removed easily. Detach the seat lid to clean the hidden hinge areas or to wash the whole lid.

Removing and Cleaning Seat Lids

Removing the Seat Lid

Press the [Power] button to turn the power

off. Confirm that the power indicator turns

off.

[Power]

Hold the seat lid with both hands and lift it

up so that the right side opens outwards,

and then remove the pin from the pin

hole.

Hold with both hands

Open out-

ward

Seat lid

Pin hole

Remove the seat lid by lifting and twisting

to to the left.

Seat lid

Lift the seat lid up

Move to the left

[CAUTION]

●

Make sure to disconnect the power plug before

removing the seat lid.

* Failure to do so may damage internal parts.

●

Do not apply excessive force to the seat lid.

* Doing so may damage the part.

●

Do not open the SpaLet

seat while the seat lid is

removed.

* Doing so could cause damage such as scratching

covers and the SpaLet seat.

●

Do not use the SpaLet seat while the seat lid is

removed.

Summary of Contents for Advanced Clean 3.0 SpaLet

























































Search results

Summary of Contents for Advanced Clean 3.0 SpaLet

Reviews:

Related manuals for Advanced Clean 3.0 SpaLet

Brands by name

Popular brands

American Standard Advanced Clean 3.0 SpaLet, User Manual

Search results

Summary of Contents for Advanced Clean 3.0 SpaLet

Reviews:

Related manuals for Advanced Clean 3.0 SpaLet

Brands by name

Popular brands