16 - EN
General Operation
n
1
Press the [Massage] button
during back cleansing or
back cleansing - mild operation.
n
2
Press the [Massage] button
again to stop the massage op-
eration.
● Press the
" " or " " sides of the
Nozzle Position button.
* There are 5 nozzle positions available.
* These positions include the default position, two front posi-
tions, and two back positions.
* The position resets to the default position when standing up
from the SpaLet
®
seat.
* To move the nozzle position forward: " "
To move the nozzle position backward: " "
[CAUTION]
• The nozzle spray may weaken during winter or other
times when the water temperature is significantly
low.
• Sit further back on the SpaLet seat.
Less water will splash if you sit further back on the seat.
• Back cleansing and back cleansing - mild operation
will stop if the SpaLet seat is flushed during this oper
-
ation.
• Do not wash or rinse for extended periods of time.
Do not wash internal parts of the body.
* Doing so may rinse away normally present bacte-
ria and cause an internal imbalance.
• Follow your doctor's instructions on use if you are
receiving treatment or medical care for areas af-
fected by use of this product.
Self-cleaning nozzle
This SpaLet seat is equipped with a self-cleaning
nozzle function that automatically washes the nozzle
before and after cleansing.
Water discharges from a point near the nozzle tip
When sitting on the SpaLet seat or pressing any cleans-
ing button, water discharges from a point near the
nozzle tip in preparation to spray warm water. It may
take some time for the water to warm in cold regions or
during winter.
Water discharges from a point near the nozzle tip im-
mediately after a user sits down on the SpaLet seat
as well as before and after cleansing. This is required
for the function and is not indicative of a failure.
(
+
Page 22)
Default position
Massage Cleansing
Water pressure varies between a stronger and weaker pressure during back cleansing or back cleansing - mild
operation to provide a pulsating effect during the wash.
* The massage function does not operate during front cleansing operation.
* The pulsating effect will be felt differently by each person.
The nozzle position can be adjusted back and forth during front cleansing, back cleansing and back cleansing
- mild operation
Nozzle Position
Summary of Contents for Advanced Clean 3.0 SpaLet
Page 54: ...51 EN ...