OPERATING
24
9.2.
Power Failure Message
The display will show:
In the event of a power failure at the controller the display will flash the power
fail message and then it will alternate with the temperature reading and the time
reading.
(For 5 seconds)
Alternating with:
(For 10 seconds)
Alternating with:
(For 5 seconds)
9.3.
SD Card Operation Error Message
Retry Message
You may get the “retry” message when trying to download data from WIMS 200
onto the SD card. If this happens try one of the following:
Verify if there is any free space on the SD card.
Note:
Make sure you backup your data before formatting the SD card.
Use a different SD card.
Summary of Contents for Walk-in Monitoring System 200
