American Panel Walk-in Monitoring System 200, Owner'S Manual

Page: 20 / 38

OPERATING
20
8. HACCP Data Download Via SD/MMC
Note: Do not remove the SD card until the controller is in “OFF” state.
WIMS 200 incorporates a complete HACCP monitoring system. The integrated
memory allows the controller to store data over a few days of normal operation. We
believe it is a good practice to download HACCP data daily.
To download HACCP data onto your computer via the SD/MMC card, follow the
instructions below.
Make sure the controller is in “OFF” state. If it is not, press and hold until
the display indicates “OFF” (approximately five seconds). Once the controller is in
“OFF” state insert the provided SD/MMC card into the SD slot at the controller, as
shown in the figure on the right.
When the SD card has been completely inserted into its slot, the display will show:
Press to save the data onto the SD card.
While data is being written on the SD card, the display will indicate the message:
After the controller writes all the information on the SD card, it will verify the
integrity of the data.
The display will show:
Once the process is finished the controller will return into “OFF” state.
The display will show:
To remove the SD card from the controller press and release the card.
Place the card in the provided USB adapter and insert the adapter into a USB port
at your computer.
On the SD card the data is saved as a text file of type EVT00001.txt in folder
CPX200 and subfolder of type WWYYXXXX (W – week, Y – year, X – index
number). The subfolder name represents the identity code of the controller.
Copy the file onto your computer. Even though the file can be opened with any
word editing program, the data layout is optimized for Microsoft Excel. See figure
below for an example.