OPERATING
22
8.1.
Clear the Events Memory
WIMS 200 memory can store 817 events. When the memory is full, it will take more time to download the data
onto the SD card. Clearing the events memory on a regular basis will ensure faster data downloading onto the
SD card.
Note: Clear the events memory only after the existing data was downloaded, checked and saved!
Before attempting to clear the events memory, the controller has to be in the
“OFF” state.
If it is not, press and hold
for 5 seconds.
The display will show:
Press
and
at the same time and hold for 10 seconds.
The display will blink:
To clear the events memory press
.
The display will show:
After 10 second, the display will revert to “OFF” state.
Summary of Contents for Walk-in Monitoring System 200
