American Megatrends Super Voyager LPX, User Manual

Page: 81 / 200

Super Voyager LPX ISA Motherboard User's Guide
Installing ADI VGA Drivers,
Continued
Configuring TurboDLD
Classic
, cont'd
Basic Configuration Menu
Menu Option Description
AutoCAD Text
Lines
Selects the number of lines in AutoCAD command prompt area. The
default is three. Valid values are 1 to 10. More than three is useful if using
this driver in a high resolution mode with small fonts. To eliminate text
lines on the screen bottom, disable the command area in AutoCAD. See
the
AutoCAD Interface, Installation and Performance Guide for
additional information. Press <Enter> to continue.
Font Size Selects the AutoCAD display screen font or font file. Choose the Font
Size, either 8x8, 8x14, 8x16, 12x20, or 12x24. For resolutions higher than
800x600, use 12x20 or 12x24. The default is 8x14.
Dual Screen
Mode
Enables AutoCAD dual screen operation.
User Interface
Option Description
Double
Click
Sets the delay for the Big Picture pop-up. This is the maximum length of time
between two button presses to display the Big Picture. Use a value between 10
and 30 (hundredths of a second). Enter multiples of 5.
BP Button Sets the mouse and digitizer button for the Big Picture. You can specify that a
double click on a digitizer or mouse button calls a Big Picture. On the BP Button
menu line, enter the number of any digitizer button other than button 1, which is
the pick button. Within AutoCAD, double click on the button to display the Big
Picture.
BP
Highlight
Mode
Controls the size of the Big Picture. The Patt Line displays the Big Picture using
dotted lines to form the outer bounding box and the zoom crosshairs. XOR Rect
uses a contrasting rectangle to display the Big Picture. The Both option uses a
combination of the Patt Line and XOR Rect for the Big Picture.
BP
Refresh
In the fastest mode, TurboDLD
Classic
does not refresh the Big Picture until a
DLDREFRESH command is issued. Depending on drawing complexity, the Big
Picture could become confusing, displaying vectors that are now actually erased,
and no longer part of the drawing in this mode. To allow the Big Picture to be
updated as objects are drawn or erased, enable BP Refresh. Disable to improve
speed.
BP Cache Enables TurboDLD Classic cache memory. This cache speeds Big Picture
operations on TIGA-based graphics adapter cards. BP Cache is normally disabled.
The performance is only about 1% with VGA adapter cards but as much as 400%
with TIGA-based graphics cards.