Setting Alarm Actions
I M P O R T A N T
Some controllers allow the alarm actions for domes to be specified at the controller. See
the appendixes for information about which controllers support this function. Do not use
both the dome configuration utility and the controller to assign the alarm actions for the
same input.
Use only the dome configuration utility or the controller to the assign the alarm
actions.
1. Select
Alarms/Areas/Home/Presets/PZ
from the
Dome Configuration Menu
.
2. Select
Set Alarm Actions
.
The
Set Alarm Action
screen appears.
3. Move the highlight bar to the appropriate alarm input. Change the setting.
•
Select
Preset
to use a preset as the alarm action. Continue with step 4.
•
Select
Pattern
to use a pattern as the alarm action. Continue with step 4.
•
Select
No Action
if you do not want to set an alarm action. Continue with step 6.
The default setting is No Action.
4. Move the highlight bar to the
Action Number
field and select the action number.
•
For
preset
, select the number from
1 through 96
. Continue with step 5.
Note:
The protocol (or controller) used may support fewer presets. Refer to the
appropriate Appendix for additional information.
•
For
pattern
, select the number from
1 through 3
for the pattern you want to assign. Continue
with step 5.
If the selected pattern is not programmed, the dome runs the Apple Peel pattern.
5. If you need to make additional changes to the alarm actions for this dome, repeat steps 3 and 4.
When finished, continue with step 6.
6. Move the highlight bar to
Send Inputs to Host?
•
Choose
Yes
to forward changes in input states to the host controller.
•
Choose
No
to prevent changes in the input states from being forwarded to the host controller.
The default setting is Yes.
7. Select
Exit
to return to the
Alarm/Areas/Home/PZ
screen.
8. When
the
Alarm/Areas/Home/PZ
screen appears, select
Exit
. The
Dome Configuration Menu
appears. Continue with
4–4
SpeedDome Ultra VII Operator's Manual
Summary of Contents for RAS915LS
