American Dynamics RAS915LS, Operator'S Manual

Page: 14 / 124

To enter the password using SensorNet, RS-422, or Manchester protocols:
1. Use the Pan/Tilt control to move the highlight the appropriate character.
2. Press Focus to select the highlighted character.
If you need to change a character that has been entered:
•
Zoom In moves the cursor to the right in the Password field.
•
Zoom Out
moves the cursor to the left in the
Password
field.
As each character in the password is selected, asterisks (*) appear in the
Password
field. When you
have finished entering the password, select
Continue
. If the correct password has been entered, the
Dome Configuration Menu
appears. If the correct password was not entered, the
Enter Password
screen remains on the monitor.
If you do not want to start the configuration utility, select
Cancel
to return to normal dome
operation.
I M P O R T A N T
If you forget the password, contact your Sales Representative for assistance.
For information about programming and enabling password protection, see Chapter 6.
Restoring Factory Settings
Some screens provide a choice to restore factory settings . This choice applies only to those settings currently
displayed on the screen. To reset all configuration settings, choose
Reset to Factory Settings
from the
Dome Configuration Menu
. The following prompt appears:
Reset to Factory Settings
No
Press
Zoom
to display the options.
•
If you want to restore the factory settings, select
Yes
.
•
If you do not want to restore the factory settings, select No .
Press Focus to accept the displayed option.
I M P O R T A N T
Selecting Reset to Factory Settings from the Dome Configuration Menu does not change
the following settings: Camera Name , Alarm Names , Area Names , Preset Names , Pattern
Names , Area Boundaries , Privacy Zones , and Presets . To reset names to the default settings, see
Chapter 5: Configuring Text Displayed On-Screen .
1–4 SpeedDome Ultra VII Operator's Manual