manualshive.com logo in svg

American Dynamics RAS915LS, Operator'S Manual

Share
Download
American Dynamics RAS915LS Operator'S Manual Download Page 24

Changing the Freeze Frame Setting 

1. Select 

Pan/Tilt/Zoom/Sync Opts 

from the 

Dome Configuration Menu

. 

2.  Move the highlight bar to 

Freeze Frame

. Change the setting. 

• 

Select On to enable Freeze Frame. This freezes the current scene when presets or patterns are 
selected. 

• 

Select Off to disable Freeze Frame. This displays the dome motion and lens adjustments when 
presets or patterns are selected.  

The default setting is Off. 

3. Select 

Exit

. The 

Dome Configuration Menu

 appears. Continue with 

What To Do Next

 on page 

2–7.  

Configuring Auto Iris/Auto Focus Resume Settings 

Normally, the camera’s iris and focus settings return to automatic mode when the dome moves a 
minimum of one frame from its current pointing position. In some situations, you may want to 
maintain specific iris and/or focus adjustments based upon your surveillance needs. 

Use the 

I/F Return to Auto

 setting to configure the auto iris and auto focus resume settings. Four 

settings are available. 

Setting 

Description 

ON 

Both return to auto iris and return to auto focus settings are 

enabled

.  

Moving the dome resumes auto mode for both iris and focus changes. 

OFF 

Both return to auto iris and return to auto focus settings are 

disabled

.  

Moving the dome 

does not

 resume auto mode for iris and focus changes. 

IRIS 

Only return to auto iris is enabled. Return to auto focus is disabled.  
Moving the dome resumes auto iris mode without changing focus settings. 

FOCUS 

Only return to 

auto focus is enabled

. Return to 

auto iris is disabled

.  

Moving the dome resumes auto focus mode without changing iris settings. 

Changing the Auto Iris/Auto Focus Resume Setting 

1. Select 

Pan/Tilt/Zoom/Sync Opts 

from the 

Dome Configuration Menu

. 

2.  Move the highlight bar to 

I/F Return to Auto

. Change the setting. 

• 

Select 

On 

to enable both resume auto iris and resume auto focus. 

• 

Select 

Off

 to disable both resume auto iris and resume auto focus. 

• 

Select 

Iris

 to enable resume auto iris only. 

• 

Select 

Focus

 to enable resume auto focus only. 

The default setting is On. 

3. Select 

Exit

. The 

Dome Configuration Menu

 appears. Continue with 

What To Do Next

 on page 

2–7.  

 

 

2–6

 

SpeedDome Ultra VII Operator's Manual

 

Summary of Contents for RAS915LS





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands