American Dynamics ADCI625-P221, Configuration And User'S Manual

Page: 86 / 142

Networking Menu
7-76 Configuration and User Guide
TCP/IP
Configure the IPv4 and IPv6 settings on the dome.
IPv4
Set IPv4 settings for the dome.
Procedure 7-1 Configure the IPv4 Settings
Step Action
1
Select
TCP/IP
from the
Networking
menu.
The IPv4 tab displays.
2
Select the
Enable DHCP
check box to enable DHCP and disable manual settings entry.
Or
Deselect to disable DHCP and allow manual settings entry.
The default setting is ‘Enabled’.
3
If Enable DHCP has been disabled:
a
Enter the
IPv4 Address
in the IPv4 Address text box in the form xxx.xxx.xxx.xxx.
b
Enter the
Network Mask
in the Network Mask text box xxx.xxx.xxx.xxx.
c
Enter the
Gateway
IP address in Gateway text box xxx.xxx.xxx.xxx.
d
Enter the
Primary DNS Server
in the Primary DNS Server text box xxx.xxx.xxx.xxx.
e
Enter the
Secondary DNS Server
in the Secondary DNS Server text box
xxx.xxx.xxx.xxx.
4
Select
Apply
to save the settings.
- End -
IPv6
Enable IPv6 on the dome.
Procedure 7-2 Enable/Disable IPv6
Step Action
1
Select
TCP/IP
from the
Networking
menu.
2
Select the
IPv6
tab.
The IPv6 tab displays.
3
Select the
IPv6 Enable
check box to enable IPv6 on the dome.
Or
Deselect the
IPv6 Enable
check box to disable IPv6 on the dome.