American Dynamics ADCI625-P221 Configuration And User'S Manual Download Page 40

Page: 40 / 142

View Menu

4-30

Configuration and User Guide

Presets

A Preset is a pre-positioned camera scene that you program for cameras installed with pan/tilt and

motorized lens capability. Up to 96 presets can be programmed for the dome.

Adding a new Preset

Create a new preset position on the dome.

Procedure 4-16 Add a Preset

Step Action

Select

Presets

from the

View

menu.

The Preset tab displays.

Select

to start the live web video.

The live video pane will display the current camera view.

Adjust the camera view as required.

• Pan, Tilt and Zoom.

• Focus Mode and Iris Mode.

Refer to GUI Camera Controls to make the required adjustments.

The following camera controls can be modified and saved as part of the preset and

accessed via the Picture Settings menu:

• White Balance

• Picture Balance

• Wide Dynamic Range (WDR)

• IR/DayNight

• Shutter Limit

In a numbered slot on the preset table, select

to add the new preset.

Enter the preset name in the

Preset Name

text box.

Select

Add

to save the preset.

Select

Cancel

- End -

Viewing a Preset

View an existing preset position.

Summary of Contents for ADCI625-P221















































































































































Search results

Summary of Contents for ADCI625-P221

Reviews:

Brands by name

Popular brands

American Dynamics ADCI625-P221, Configuration And User'S Manual

Search results

Summary of Contents for ADCI625-P221

Reviews:

Brands by name

Popular brands