manualshive.com logo in svg

American Dynamics ADCI625-P221, Configuration And User'S Manual

Share
Download
American Dynamics ADCI625-P221 Configuration And User'S Manual Download Page 35

View Menu

4-25

4

•

visible

 - Most common, visible lighting sources.

• 850nm

 - Ideal for 850nm IR Illuminators.

• 950nm 

- Ideal for 950nm IR Illuminators.

The default setting is ‘visible’.

- End -

Day Night Mode

The dome provides a black-and-white (B/W) mode to improve camera performance when the light 

level falls below certain thresholds. This allows clear images to be obtained under low-light 

conditions. There are five Day/Night settings: Off, On, Auto High, Auto Mid and Auto Low.

Configuring Day Night Mode

Procedure 4-9  Configure Day Night Mode

Step     Action

1

Select 

Picture Settings 

from the 

View 

menu. 

2

Select the 

IR/DayNight 

tab. 

The IR/DayNight tab displays.

3

Select a Day Night Mode setting:

•

off

 - disable the Day Night Mode. The camera will operate in color mode only.

•

on

 - enable full-time black and white mode.

•

autolow

 - stays in color mode the longest only switching to BW at the lowest 

light levels.

•

automid

 - good balance of Color and BW mode performance.

•

autohigh

 - in color mode this is the least switching in and out of black and white 

at the highest light levels of the three.

The default setting is ‘autolow’.

- End -

Shutter Limit

In addition to the IR & Day/Night Modes the Illustra i625 PTZ dome provides additional 

functionality to help compensate for low-light scenes: Automatic Gain Control (AGC) and Open 

Shutter. 

Summary of Contents for ADCI625-P221















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands