American Dynamics ADCI625-P221, Configuration And User'S Manual

Page: 102 / 142

Networking Menu
7-92 Configuration and User Guide
Reset the Dome to Factory Default Settings
Restore the settings on the dome to factory default.
Note
Network settings, presets, patterns and sequences can be retained if required.
Procedure 7-21 Resetting the dome
Step Action
1
Select
Maintenance
from the
Networking
menu.
2
Select the
Reset
tab.
The Reset tab displays.
3
Select the
Preserve networking settings
check box to retain the current network settings
during the dome reset.
Or
Deselect the
Preserve networking settings
to restore the default networking settings.
The default setting is ‘Enabled’.
4
Select the
Preserve presets, patterns and sequences
check box to retain the current
presets, patterns and sequences during the dome reset.
Or
Deselect the
Preserve presets, patterns and sequences
to remove existing presets,
patterns and sequences.
The default setting is ‘Enabled’.
5
Select
Reset
You will be prompted to confirm the dome reset.
6
Select
OK
to confirm.
Or
Select
Cancel
.
- End -