American DJ
®
- www.americandj.com - Accu UFO PRO Instruction Manual Page 9
American DJ
®
- www.americandj.com - Accu UFO PRO Instruction Manual Page 10
Accu UFO PRO Controls & Features
Accu UFO PRO Controls & Features
1. Lens Assembly -
There are 12 high quality lenses that make up the
circular shaped moving head.
2. Digital Display -
This display shows the menu and operating func-
tions that you can choose from.
3. Mode/ESC Button -
This button is used to exit menus and to scroll
backwards through certain menus only.
4. Up Button -
This button is used to scroll forward when navigating
through the system menu.
5. Down Button -
This button is used to scroll backwards when navi-
gating through the system menu.
6. Enter Button -
This button is used to select and confirm a func-
tion when working in the system menu. It is also used to exit certain
menus.
7. Microphone -
This microphone receives external low frequencies
to trigger the unit in Sound-Active mode. This microphone is designed
to receive low frequency sounds only, tapping on the microphone and
high pitch sounds may not trigger the unit.
8. Carrying Handles -
The includes built-in carrying handles. Be sure
to always handle the unit by the built-in handles. Never lift or carry-
ing the unit by head or yoke. Pulling on or transporting the unit by the
moving head may severely damage the unit and will void the unit war-
ranty.
9. XLR Output Jack -
This jack is used to transmit the incoming
DMX signal to another DMX fixture, or transmit a Master/Slave signal
to the next Accu UFO PRO in the chain. For best results in DMX or
Master/Slave mode terminate this jack if it is the last unit in the chain.
See “Terminator” on page 12.
10. XLR DMX Input Jack -
This jack is used to receive an incoming
DMX signal or Master/Slave signal.
11. Power Switch -
This switches the power to the fixture “On” and
“Off”.
12. Power Cord Inlet & Fush Holder -
This unit is equipped with
a removable I.E.C. power cord. Be sure to only use the power cord
included with the unit, this cord is designed to match the electrical
requirements of the unit. Other cords may cause the unit to overheat
or malfunction. Never use this fixture if the ground prong has been
removed or broken off. The ground prong is designed to reduce the
risk of fire or electrical shock in the event the unit suffers from an inter-
nal short.
The fuse housing stores a 4 amp protective fuse. Never defeat the
fuse, the fuse is designed to protect the electronics in the event of
severe power fluctuations. Always be sure to replace the fuse with an
exact match as the one being replaced, unless otherwise told to do so
by an authorized American DJ
®
service technician.
