background image

 

Model:    

 

Accu UFO PRO

 

Voltage*:

 

 

 

100~240V, 50/60Hz

 

LEDs:

   

 

 

32 x 1W LED’s (8 Red, 8 

 

 

 

 

 

Green, 8 Blue, & 8 White) 

 

Power Consumption: 

100W

 

Dimensions: 

 

 

16.5”(L) x 14”(W) x 18.5”(H)

 

 

 

 

 

425mm x 353mm x 467mm

 

Weight:

 

 

 

30 Lbs. / 13.5 kgs.

 

Fuse:

   

 

 

4A

 

Duty Cycle:

   

 

None

 

DMX: 

 

 

 

8 or 10 DMX Channels

 

Sound Active:

 

 

Yes

 

Working  Position:

   

Any Safe, Secure Position

 

Warranty:

 

 

 

3 Year (1095 days)

Please Note:

 Specifications and improvements in the design 

of this unit and this manual are subject to change without any 
prior written notice.

 Accu UFO PRO    

                               Specifications

©American DJ Supply

American DJ World Headquarters:

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-582-2610

Web: www.americandj.com / E-mail: [email protected]

American DJ Europe

Junostraat 2

6468 EW Kerkrade

Netherlands

[email protected] / www.americandj.eu

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

American DJ

®

  -  www.americandj.com  - Accu UFO PRO Instruction Manual Page 43

 Accu UFO PRO    

 

                             Warranty

MANUFACTURER’S LIMITED WARRANTY
A.  

American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American 

Audio products to be free of manufacturing defects in material and workmanship for a prescribed 
period from the date of purchase (see specific warranty period on reverse). This warranty shall be 
valid only if the product is purchased within the United States of America, including possessions 
and territories. It is the owner’s responsibility to establish the date and place of purchase by ac-
ceptable evidence, at the time service is sought. 
B. 

For warranty service you must obtain a Return Authorization number (RA#) before 

sending back the product. Contact American DJ, Inc. Service Department at 800-322-6337. Send 
the product only to the American DJ, Inc. factory. All shipping charges must be pre-paid. If the 
requested repairs or service (including parts replacement) are within the terms of this warranty, 
American DJ, Inc. will pay return shipping charges only to a designated point within the United 
States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories 
should be shipped with the product. If any accessories are shipped with the product, American DJ, 
Inc. shall have no liability whatsoever for loss of or damage to any such accessories, nor for the 
safe return thereof.  
C.  

This warranty is void if the serial number has been altered or removed; if the product is 

modified in any manner which American DJ, Inc. concludes, after inspection, affects the reliability 
of the product; if the product has been repaired or serviced by anyone other than the American DJ, 
Inc. factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the 
product is damaged because not properly maintained as set forth in the instruction manual. 
D. 

This is not a service contract, and this warranty does not include maintenance, cleaning 

or periodic check-up. During the period specified above, American DJ, Inc. will replace defec-
tive parts at its expense with new or refurbished parts, and will absorb all expenses for warranty 
service and repair labor by reason of defects in material or workmanship.  The sole responsibility 
of American DJ, Inc. under this warranty shall be limited to the repair of the product, or replace-
ment thereof, including parts, at the sole discretion of American DJ.  All products covered by this 
warranty were manufactured after January 1, 1990, and bear identifying marks to that effect. 
E. 

American DJ, Inc. reserves the right to make changes in design and/or improvements 

upon its products without any obligation to include these changes in any products theretofore 
manufactured. No warranty, whether expressed or implied, is given or made with respect to any 
accessory supplied with products described above. Except to the extent prohibited by applicable 
law, all implied warranties made by American DJ, Inc. in connection with this product, including 
warranties of merchantability or fitness, are limited in duration to the warranty period set forth 
above. And no warranties, whether expressed or implied, including warranties of merchantability 
or fitness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s 
sole remedy shall be such repair or replacement as is expressly provided above; and under no 
circumstances shall American DJ, Inc. be liable for any loss or damage, direct or consequential, 
arising out of the use of, or inability to use, this product.  
This warranty is the only written warranty applicable to American DJ and American Audio  
Products and supersedes all prior warranties and written descriptions of warranty terms and 
conditions heretofore published. 
MANUFACTURER’S LIMITED WARRANTY PERIODS:
• All American Audio Products = 1-year (365 day) Limited Warranty (except V-Plus Series Ampli-
fiers) 
• All American Audio V-Plus Series Amplifiers = 3-year (1095 day) Limited Warranty
• American DJ Lighting and American DJ Branded Products = 1-year (365 day) Limited Warranty 
(Such as: Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble 
Machines, Mirror Balls, Par  Cans, Trussing, Lighting Stands etc. excluding Laser Products, lamps, 
and Star Tec Series) 
• American DJ Laser Products and Star Tec Products = 90-Day Limited Warranty
• American DJ L.E.D. Products = 3-year (1095 day) Limited Warranty (excluding motors which 
have a 1-year (365 day Limited Warranty)

*Auto  Sensing  Voltage:

  This  fixture  contains  a  electronic 

ballast, which will auto sense the voltage when it is plugged into 
the power source.

Summary of Contents for Accu UFO PRO























Reviews: