![background image](http://html1.mh-extra.com/html/american-dj/accu-ufo-pro/accu-ufo-pro_user-instructions_2922989018.webp)
American DJ
®
- www.americandj.com - Accu UFO PRO Instruction Manual Page 35
American DJ
®
- www.americandj.com - Accu UFO PRO Instruction Manual Page 36
Operating Modes:
The Accu UFO PRO can operate in three
different modes. This next section will detail the differences in
the operating modes.
• Sound Active mode -
The unit will react to sound.
• Auto mode -
The unit will run through a built-in program.
• DMX control mode -
This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation
®
Show
Designer.
™
Universal DMX Control:
This function allows you to use a uni-
versal DMX-512 controller such as the Elation
®
DMX Operator™
or Elation
®
Show Designer™ to control head movement, the color
wheel, gobo wheel, and the shutter (strobe). A DMX controller allows
you to create unique programs tailored to your individual needs.
1. The Accu UFO PRO can be either a 8 or 10 DMX channels. See
pages 38-41 for detailed description of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 7-9 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 17 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Stand-Alone (Sound Active or Auto Program):
This mode allows
a single unit to run to the beat of the music or run through a built-in
program.
1. Access the main menu.
2. Tap the UP button until
“
PLAY
” is displayed, and Press ENTER.
3.
Tap the UP button until “
AUTO
” is displayed, and Press ENTER.
4. Press the UP or DOWN button to select “
RUN
”, or “
AUDI
”. “
RUN
”
will make the unit run through a built-in program. “
AUDI
” will make
the unit sound active.
Accu UFO PRO
Operation
missing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
06Er – COLOR WHEEL error:
This message will appear after a fixture reset, if the head’s mag-
netic-indexing circuit malfunctions (sensor failed or magnet is
missing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
Accu UFO PRO
Error Codes