American Control Electronics Minarik DRIVES RG500 Series, User Manual, Page: 40 / 72

31
RG500 Series
RG500A and RG510A
1. Set the FORWARD/BRAKE/REVERSE switch to the BRAKE
position.
2. Turn the speed adjust potentiometer to “0” (full CCW) or set
the input voltage signal to minimum.
3. Set the POWER switch to the ON position.
4. Set the FORWARD/BRAKE/REVERSE switch to the desired
direction of rotation.
5. Slowly advance the speed adjust potentiometer clockwise
(CW) or increase the input voltage signal. The motor slowly
accelerates as the potentiometer is turned CW or as the input
voltage signal is increased. Continue until the desired speed is
reached.
6. To brake the motor to a stop, set the FORWARD/BRAKE/
REVERSE switch to the BRAKE position. To coast the motor to a
stop, set the POWER switch to the “O” (OFF) position.
7. To reverse direction, set the FOWARD/BRAKE/REVERSE switch
to the desired direction.
8. Set the POWER switch to the OFF position.