ABOUT THIS MANUAL
ADVANCED MICRO CONTROLS INC.
6
Revision Record
This manual, 940-0S090, is the first revision of this manual. It was first released January 9, 2009.
Revision History
940-0S090 Initial Release.
Where To Go From Here
This manual contains information that is of interest to everyone from engineers to operators. The table below
gives a brief description of each chapter’s contents to help you find the information you need to do your job.
CHP
Num.
Chapter Title
Intended Audience
1
Anyone new to the SD17060E. This chapter gives a basic overview
of the features available on the unit, typical applications, and electri-
cal specifications.
2
Anyone that needs detailed information on how the drive can be used
to control motion in your application.
3
Anyone new to installing electronic controls in an industrial environ-
ment. The chapter includes general information on grounding, wir-
ing, and surge suppression that is applicable to any controls
installation.
4
Anyone that must install a SD170650E on a machine. Includes infor-
mation on mounting, grounding, and wiring specific to the unit.
5
Anyone that must set the IP address of the SD17060E using a BOOTP
server.
6
Anyone that needs information on configuring a host controller.
Detailed instructions are given for ControlLogix, CompactLogix, and
MicroLogix systems from Rockwell Automation.
7
Anyone that needs a Detailed information on the format of the Net-
work Data to and from the SD17060E.
