Help Commands
www.3ware.com
79
/cx add type=<
RaidType
> disk=<
p:-p..
> [stripe=<
Stripe
>] [noscan] [nocache]
[group=<3|4|5|6>] [autoverify] [ignoreECC]
[name=string (9000 only)]
[storsave=<protect|balance|perform[quiet]>(9550SX and 9590SE
only)] RaidType = { raid0, raid1, raid5, raid10, raid50,
single, spare, JBOD (7000/8000 only)}
/cx add rebuild=
ddd:hh:duration
(9000 only)
/cx add verify=
ddd:hh:duration
(9000 only)
/cx add selftest=
ddd:hh
(9000 only)
/cx del rebuild=
slot_id
(9000 only)
/cx del verify=
slot_id
(9000 only)
/cx del selftest=
slot_id
(9000 only)
/cx set exportjbod=on|off (9000 only)
/cx set ondegrade=cacheoff|follow (9000 only)
/cx set spinup=
nn
(9000 only)
/cx set stagger=
nn
(9000 only)
/cx set autocarve=on|off (9000 only)
/cx set rebuild=enable|disable|<1..5> (enable|disable for 9000 only)
/cx set verify=enable|disable|<1..5> (enable|disable for 9000 only)
/cx set selftest=enable|disable [task=UDMA|SMART](9000 only)
/cx set autorebuild=on|off (9550SX and 9590SE only)
/cx flush
/cx commit (Windows only) (Also known as shutdown)
/cx start mediascan (7000/8000 only)
/cx stop mediascan (7000/8000 only)
/cx rescan [noscan] NOTE: Does not import non-JBOD on 7000/8000 models.
//localhost>
Help with attributes
As you work with specific objects or commands, you can also use
?
to get
help.
For example: If you enter the command
/c0 show
and then need help on what
specific attribute syntax is possible, you can use
?
to get help as following:
//localhost> /c0 show ?
/cx show
/cx show
attribute
[
attribute ...
] where attribute is:
achip|allunitstatus|autocarve(9000 series)|
autorebuild(9550SX only)|bios|carvesize(9000 series)|driver|
drivestatus|exportjbod|firmware|memory|model|monitor|numdrives|
numports|numunits|ctlbus(9550SX and 9590SE only)serial|
ondegrade (9000S only)|pcb|pchip|spinup|stagger|unitstatus|
/cx show all where all means attributes and configurations.
/cx show diag
/cx show alarms [reverse]
/cx show rebuild (9000 only)
/cx show verify (9000 only)
/cx show selftest (9000 only)
//localhost>
