Installing the 3ware CLI
www.3ware.com
5
Installing the 3ware CLI
Warning!
If you are using 3DM, as opposed to 3DM2, AMCC does not
recommend installing both 3DM and CLI on the same system.
Conflicts may occur. For example, if both are installed, alarms will
be captured only by 3DM. You should use either CLI or 3DM to
manage your 3ware RAID controllers.
This is not an issue for 3DM2. It can be installed with CLI.
Installing the 3ware CLI on Windows
3ware CLI can be installed or run directly from the 3ware software CD, or the
latest version can be downloaded from the 3ware web site,
http://www.3ware.com
. Online manual pages are also available in nroff and
html formats. These are located in
/packages/cli/tw_cli.8.html
or
tw_cli.8.nroff.
To install 3ware CLI on Windows
Copy the file
tw_cli.exe
to the directory from which you want to run the
program.
CLI is located on the 3ware CD in the directory
\packages\cli\windows
Note:
CLI comes in both 32-bit and 64-bit versions. Be sure to copy the
correct version for the version of the operating system you are using.
Permissions Required to Run CLI
To run CLI, you can be logged onto Windows with one of the following sets
of persmissions:
Administrator
User with administrator rights
Domain administrator
Domain user with Domain Admin or Administrator membership
Without the correct privileges, CLI will prompt and then exit when the
application is executed.
If you are uncertain whether you have the correct permissions, contact your
network administrator.
