Sched Commands
www.3ware.com
109
sched verify
cid
remove
slot_id
This command removes (or unregisters) the verify background task in slot
slot_id
.
For example:
//localhost> tw_cli sched verify c1 remove 3
Removes the verify background task in slot 3.
Warning:
If all timeslots are removed, be sure to also disable the
schedule so that background tasks occur as required. Otherwise the
applicable background task will never occur. Using a schedule
requires that time slots be defined.
sched verify
cid
enable
This command enables all verify background tasks on controller
cid
.
Note:
When enabling the verify schedule you must also remember to also
enable the autoverify setting for the arrays to be verified. For details, see “set
autoverify cid uid on|off” on page 114.
sched verify
cid
disable
This command disables all verify background tasks on controller
cid
.
sched selftest
cid
This command displays the current selftest background task as illustrated
below.
//localhost> tw_cli sched selftest c1
Selftest Schedule for controller /c1
========================================================
Slot Day Hour UDMA SMART
--------------------------------------------------------
0 Sun 12:00am enabled enabled
1 Mon 12:00am enabled enabled
2 Tue 12:00am enabled enabled
3 Wed 12:00am enabled enabled
4 Thu 12:00am enabled enabled
5 Fri 12:00am enabled enabled
6 Sat 12:00am enabled enabled
