Chapter 2. Primary CLI Syntax Reference
32
3ware 9000 Series Serial ATA Controller CLI Guide
/cx show pchip
This command reports the PCHIP (PCI Interface Chip) version of the
specified controller /cx.
Example:
//localhost> /c0 show pchip
/c0 PCHIP Version = 1.x
/cx show achip
This command reports the ACHIP (ATA Interface Chip) version of the
specified controller /cx.
Example:
//localhost> /c0 show achip
/c0 ACHIP Version = 3.x
/cx show numdrives
This command reports the number of drives currently managed by the
specified controller /cx. This report does not include (logically) removed or
exported drives. Also note that physically removed disk(s) will not be
detected unless I/O is performed against the disk. See “/cx/px show smart” on
page 71 for a workaround.
Example:
//localhost> /c0 show numdrives
/c0 Number of Drives = 5
/cx show numports
This command reports the port capacity (number of physical ports) of the
specified controller /cx.
Example:
//localhost> /c0 show numports
/c0 Number of Ports = 12
/cx show numunits
This command reports the number of units currently managed by the specified
controller /cx. This report does not include off-line units (or exported units).
Example:
//localhost> /c0 show numunits
/c0 Number of Units = 1
