Controller Object Commands
www.3ware.com
47
/cx add rebuild=
ddd:hh:duration
This command adds a new background rebuild task to be executed on the day
ddd
(where ddd is Sun, Mon, Tue, Wed, Thu, Fri, and Sat), at the hour
hh
(range 0 .. 23), for a duration of
duration
(range 1 .. 24) hours. A maximum of
seven rebuild tasks can be scheduled. This command will fail if no (empty)
task slot is available.
For example:
//localhost> /c1 add rebuild=Sun:16:3
adds a rebuild background task schedule to be executed on Sundays at 16
hours (4:00 PM) for a duration of 3 hours.
Setting Up a Rebuild Schedule
Setting up a rebuild schedule requires several steps, and several different CLI
commands in addition to
/cx add rebuild
.
To set up the rebuild schedule you want to use, follow this process:
1
Use the
/cx show rebuild
command to display the current schedule for
rebuild tasks. (For details, see page 42.)
2
If any of the scheduled tasks do not match your desired schedule, use the
/cx del rebuild
command to remove them. (For details, see page 49.)
3
Use the
/cx add rebuild
command to create the rebuild schedule slots you
want (described above.)
4
Use the
/cx set rebuild=enable
command to enable the schedule (this
enables all rebuild schedule slots). (For details, see page 50.)
Warning:
If all time slots are removed, be sure to also disable the
schedule. Otherwise the applicable background task will never
occur.
/cx add verify=
ddd:hh:duration
This command adds a new background verify task to be executed on the day
ddd
(where ddd is Sun, Mon, Tue, Wed, Thu, Fri, and Sat), at hour
hh
(range 0 .. 23), for a duration of
duration
(range 1 .. 24) hours. A maximum of
seven verify tasks can be scheduled. This command will fail if no (empty)
task slot is available.
For example:
//localhost> /c1 add verify=Sun:16:3
adds a verify background task schedule to be executed on Sundays at 16
hours (4:00 PM) for a duration of 3 hours.
