Chapter 2. Primary CLI Syntax Reference
36
3ware 9000 Series Serial ATA Controller CLI Guide
caused by an ECC error, SMART failure, or a device error. Rescanning the
controller will clear the drive error status if the condition no longer exists.
Example:
//localhost> /c0 show unitstatus
Unit UnitType Status %Cmpl Stripe Size(GB) Cache AVerify IgnECC
---------------------------------------------------------------------------
u0 RAID-5 OK - 64K 223.485 OFF OFF ON
u1 JBOD OK - - 76.3352 OFF OFF -
u2 RAID-0 OK - 64K 148.99 ON ON -
/cx show allunitstatus
This command presents a count of total and Not Optimal units managed by
the specified controller /cx. For more about the meaning of Not Optimal, see
“Shell Object Commands” on page 23.
Example:
//localhost> /c0 show allunitstatus
/c0 Total Optimal Units = 2
/c0 Not Optimal Units = 0
/cx show drivestatus
This command reports a list of drives and their port assignment, status, the
unit with which they are associated, their size in gigabytes and blocks, and the
serial number assigned by the drive manufacturer.
Example:
//localhost> /c0 show drivestatus
Port Status Unit Size Blocks Serial
--------------------------------------------------------------
p0 OK u0 149.05 GB 312581808 3JS0TF14
p1 OK u0 149.05 GB 312581808 3JS0TETZ
p2 OK u1 149.05 GB 312581808 3JS0VG85
p3 OK u1 149.05 GB 312581808 3JS0VGCY
p4 OK u1 149.05 GB 312581808 3JS0VGGQ
p5 OK u2 149.05 GB 312581808 3JS0VH1P
p6 OK - 149.05 GB 312581808 3JS0TF0P
p7 OK - 149.05 GB 312581808 3JS0VF43
p8 OK - 149.05 GB 312581808 3JS0VG8D
p9 NOT-PRESENT - - - -
p10 NOT-PRESENT - - - -
p11 NOT-PRESENT - - - -
