Chapter 3. Legacy CLI Syntax Reference
104
3ware 9000 Series Serial ATA Controller CLI Guide
[maint] rebuild
cid uid
resume
This command allows you to resume the rebuild operation on the specified
unit. See “[maint] rebuild cid uid pause” on page 103 for more details.
[maint] flush
cid
[
uid
...]
This command allows you to flush the write cache on the specified unit or all
units associated with controller
cid
. This command does not apply to Spare
unit types.
[maint] verify
cid uid
[stop]
This command starts or stops a background verification process on the
specified unit. To start, omit “stop”.
The following table shows the supported RAID types for verification as a
function of controller model and logical unit type. N/A (Not Applicable)
refers to cases where the given logical unit type is not supported on a
particular controller model.
[maint] mediascan
cid
start|stop
This command applies to 7000/8000 controllers. It provides media scrubbing
for validating the operationality of a disk, including bad block detection and
remapping. The start or stop operations start or stop media scan operation on
the specified controller. For the 9000 series, the verify function includes the
features of the media scan command.
Table 17: Supported RAID (Logical Unit) Types for Verification
Model
R-0
R-1
R-5
R-10
R-50
Single
JBOD
Spare
7K/8K
No
Yes
Yes
Yes
N/A
N/A
No
No
9K
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
