Chapter 3. Legacy CLI Syntax Reference
112
3ware 9000 Series Serial ATA Controller CLI Guide
Syntax
alarms
alarms c<c> [c<c> ...]
Warning!
3ware does not recommend installing both 3DM and CLI.
Conflicts may occur. If both are installed, alarms will be captured
only by 3DM.
Warning!
3DM and CLI handle alarms differently. When using CLI with the
7/8000 series, save the alarm data immediately after viewing it.
Once the alarms are viewed using CLI, they cannot be viewed
again.
With the 9000 series, the alarms can be viewed multiple times with the CLI,
but will be lost following a reboot. At this time there is no CLI option to clear
the alarms log.
alarms [
cid
...]
This command displays all available alarms on a single controller, multiple
controllers, or on all controllers. Invoked without
cid
, displays alarms
associated with all detected controllers.
Note:
A listing of AEN codes can be found in the “Troubleshooting:
Problems and Solutions” section of
3ware 9000 Series Serial ATA RAID
Controller User Guide
.
Typical output looks like:
tw_cli> alarms
Ctl Date Severity Message
--------------------------------------------------
c0 - - ERROR: Unit degraded: Unit #0
c1 [Fri Nov 28 04:26:31 2003] ERROR (0x04:0x0002): Degraded unit detected: unit=0, port=2
c1 [Fri Nov 28 06:13:54 2003] INFO (0x04:0x000B): Rebuild started: unit=0
c1 [Fri Nov 28 06:30:35 2003] INFO (0x04:0x003B): Background rebuild paused: unit=0
c1 [Fri Nov 28 06:33:00 2003] ERROR (0x04:0x0002): Degraded unit detected: unit=0, port=0
c1 [Fri Nov 28 06:33:04 2003] ERROR (0x04:0x0002): Degraded unit detected: unit=0, port=4
c1 [Fri Nov 28 06:33:46 2003] INFO (0x04:0x000B): Rebuild started: unit=0
c1 [Fri Nov 28 06:37:58 2003] INFO (0x04:0x000B): Rebuild started: unit=0
c1 [Fri Nov 28 07:51:34 2003] INFO (0x04:0x0005): Background rebuild done: unit=0
c1 [Fri Nov 28 07:59:43 2003] INFO (0x04:0x0005): Background rebuild done: unit=0
c1 [Mon Dec 1 02:26:12 2003] ERROR (0x04:0x0002): Degraded unit detected: unit=0, port=3
