AMB8426-M_8626-M_MA_EN_V2_4
Page 45 of 48
Released: Nov.2013
17 Regulatory compliance information
17.1 Important notice
The use of RF frequencies is limited by national regulations. The AMB8426-M has been
designed to comply with the R&TTE directive 1999/5/EC of the European Union (EU).
The AMB8426-M can be operated without notification and free of charge in the area of the
European Union. However, according to the R&TTE directive, restrictions (e.g. in terms of duty
cycle or maximum allowed RF power) may apply.
Conformity assessment of the final product
The AMB8426-M is a subassembly and is designed to be embedded into other products
(products incorporating the AMB8426-M are henceforward referred to as "final products").
It is the responsibility of the manufacturer of the final product to ensure that the final product is
in compliance with the essential requirements of the European Union's Radio &
Telecommunications Terminal Equipment (R&TTE) directive.
The conformity assessment of the subassembly AMB8426-M carried out by AMBER wireless
GmbH does not replace the required conformity assessment of the final product in accordance
to the R&TTE directive!
Exemption clause
Relevant regulation requirements are subject to change. AMBER wireless GmbH does not
guarantee the accuracy of the before mentioned information. Directives, technical standards,
procedural descriptions and the like may be interpreted differently by the national authorities.
Equally, the national laws and restrictions may vary with the country. In case of doubt or
uncertainty, we recommend that you consult with the authorities or official certification
organizations of the relevant countries. AMBER wireless GmbH is exempt from any
responsibilities or liabilities related to regulatory compliance.
