Before the front hopper can be used with the T-Pack
F, the working position sensor must be installed on
the T-Pack F.
21. Install the working position sensor
1
on the
desired top link mounting
3
or
4
.
22. Install the nuts and washers
2
.
23.
To adjust the working position sensor to the top
link,
see section "Adjusting the working position
sensor".
1
4
3
2
CMS-I-00003637
Before the FTender can be used with the T-Pack F,
the transport lock must be installed on the FTender.
24. Install the operating handle
1
.
25. Install the bolts
3
.
26. Install the nuts and washers
2
.
1
2
3
CMS-I-00003638
27. Install the bolts
1
.
28. Install the locking plate
2
.
29. Install the nuts and washers
3
.
3
2
1
CMS-I-00003639
6 | Preparing the machine
Preparing the implement for operation
MG6492-EN-II | G.1 | 26.04.2021
78
