1.
Depressurise the hydraulic system between the
tractor and the implement using the tractor control
unit.
2.
Clean the hydraulic plugs.
3.
Couple the hydraulic hoses
1
to the hydraulic
sockets of the tractor according to the marking
2
.
The hydraulic plugs lock perceptibly.
4.
Route the hydraulic hoses with sufficient freedom
of movement and without chafing points.
1
2
CMS-I-00001045
Depending on the implement combination, the
hydraulic hoses of the front hopper are coupled to the
rear-mounted implement.
5.
Couple the hydraulic hoses
1
to the hydraulic
sockets of the hose package according to the
marking
2
.
The hydraulic plugs lock perceptibly.
6.
Route the hydraulic hoses with sufficient freedom
of movement and without chafing points.
1
2
CMS-I-00002766
6.2.4 Pegging the parking rollers in parking position
1.
Raise the implement.
2.
Remove the linch pin
1
.
3.
Peg all of the parking rollers
2
in parking
position.
4.
Secure the parking rollers in parking position with
the linch pin.
CMS-I-00002471
CMS-T-00003212-B.1
6 | Preparing the machine
Coupling the implement
MG6492-EN-II | G.1 | 26.04.2021
50
