12. Remove the 8 bolts
2
.
13. Remove the clamps
1
.
2
1
CMS-I-00002520
14. Slowly drive the tractor in reverse.
Release the T-Pack F in the tractor lift linkage
1
from the front hopper
2
.
15.
To move the parking supports to the lower
position,
see section "Using the parking supports".
16.
To uncouple the T-Pack F,
see "Uncoupling the 3-point mounting frame".
1
2
CMS-I-00002516
Before the front hopper can be coupled, the lower link
mountings
3
must be installed.
Mounting category
Distance measurement
A
Cat. 3N
364 mm
Cat. 2
435 mm
17. Put the clamps
1
on the beam section.
18. Insert the bolts
2
.
19. Loosely install the lower link mountings with nuts
and washers
4
.
20.
Depending on the mounting category,
adjust the lower link mountings to the desired
distance
A
.
2
3
3
4
1
A
A
CMS-I-00002605
6 | Preparing the machine
Preparing the implement for operation
MG6492-EN-II | G.1 | 26.04.2021
81
