Errors
Cause
Solution
The working depth is uneven
across the entire implement length
(front to rear)
The implement is supported on the
tractor hitch
If the implement is coupled
with the lower link hitch,
put the tractor lower links in
float position.
If the implement is coupled
with the drawbar eye or ball
hitch coupling,
open the stop tap on the
drawbar cylinder and put the
"yellow" tractor control unit in
float position.
When working with traction
assistance,
reduce the pressure of
the traction assistance, see
page 71.
The tine rows are clogged with
plant residues
Too much plant residues on the
field
Lift the implement regularly.
Remove plant residues from
the implement.
Lower the implement.
The working depth of the coulters
or levelling unit is too deep
Reduce the working depth of
the coulters, see page 64.
Reduce the tilt of the levelling
unit, see page 68.
The work pattern behind the roller
is uneven
The levelling unit is not correctly
set
Change the tilt of the levelling
unit, see page 68.
Adjust the side closers, see
page 68.
Soil piles up in front of the roller
The roller is working too deep
Reduce the working depth of
the coulters, see page 64.
Too much load on the roller
Lower the running gear with
the "yellow" tractor control unit
until the running gear carries
a portion of the implement
weight.
Put the "yellow" tractor control
unit back in float position.
If the implement is equipped
with spacer elements,
secure the setting of the
hydraulic cylinder on both
running gear wheels with
spacer elements, see page 52,
Steps 10 to 14.
8 | Eliminating faults
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
79