10.1.13 Checking the brake pads
INTERVAL
After the first 200 operating hours
Every 3 months
1.
Check the brake pads through the inspection
holes.
2.
If the brake pads have reached the wear limit of
2 mm, are damaged or have heavy soiling,
have the brake pads replaced by a specialist
workshop.
CMS-I-00003599
10.1.14 Checking the pneumatic brake system
INTERVAL
Every 200 operating hours
or
Every 3 months
Test criteria
Setpoints
Pressure drop in the pneumatic brake system
maximum of 0.15 bar in 10 minutes
Air pressure in the compressed air tank
6 bar - 8.2 bar
Brake cylinder pressure
0 bar when the brake is not actuated
1.
Check the compressed air lines and bellows for
damage.
2.
Have damaged components replaced by a
specialist workshop.
3.
Have the specified test criteria checked by a
specialist workshop.
CMS-T-00004984-B.1
CMS-T-00004985-B.1
10 | Repairing the implement
Maintaining the implement
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
95
