4.
If the implement is equipped with a rigid
drawbar,
Lower the implement with the tractor lower links
and with the "yellow" tractor control unit, until the
parking legs of the roller holder are standing on
the ground
or
If the implement is equipped with a hydraulic
drawbar,
lower the implement with the "yellow" tractor
control unit using the running gear and the
drawbar stop tap opened as necessary, until the
parking legs of the roller holder are standing on
the ground.
5.
Unscrew the bolted connections
1
on the roller
mounts
2
.
6.
Remove the clamping brackets
3
and bolted
connections.
7.
Lift the implement completely, see page 50.
8.
Drive the implement away from the roller.
9.
Fold the implement using the "blue" tractor control
unit.
1
2
3
CMS-I-00006904
IMPORTANT
Damage due to spacer elements not being
used or not used properly
The implement can be damaged if the spacer
elements are not swivelled in or out or
are not swivelled in or out properly after
dismounting the roller or before mounting the
roller.
Always swivel the spacer elements in
or out on both running gear hydraulic
cylinders.
Always swivel the spacer elements in
after dismounting the roller, and always
swivel them out before mounting the
roller.
After swivelling in the spacer elements,
make sure that the recesses of the spacer
elements are always fully resting on the
piston rods.
2
1
3
4
CMS-I-00006909
6 | Preparing the machine
Preparing the implement for operation
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
53