7.3 Removing the road safety bars
1.
Remove the road safety bars from the rear
harrow.
2.
Turn the traffic safety bars
1
by 180°, place on
top of each other on the brackets
2
.
3.
Secure the road safety bars with tensioners
3
.
CMS-I-00000518
7.4 Adjusting the working depth
7.4.1 Adjusting the working depth of the coulters
7.4.1.1 Hydraulic adjustment of the coulter working depth
NOTE
If a uniform working depth cannot be adjusted, the
hydraulic cylinders must be synchronised.
1.
To synchronise the hydraulic cylinders,
completely extend the hydraulic cylinders
3
with
the "green" tractor control unit.
2.
Hold the "green" tractor control unit for 10
seconds.
The hydraulic cylinders will be synchronised.
The arrow
2
on the scale
1
shows the set working
depth.
1
2
3
CMS-I-00006970
CMS-T-00000091-C.1
CMS-T-00009869-A.1
CMS-T-00009870-A.1
CMS-T-00010200-A.1
7 | Using the implement
Removing the road safety bars
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
64