2.
Actuate the "blue" tractor control unit.
The sections will be unfolded.
3.
When the sections have reached the end
position,
switch the "blue" tractor control unit to float
position.
6.3.3 Preparing the implement for working without the roller
The implement can be used with or without the roller.
When working without the roller, the depth of the
implement is controlled via the support wheels and
the running gear. Single rollers are parked with a
roller holder.
REQUIREMENTS
The implement is coupled, see page 43
The implement is completely lifted, see
page 50
The implement is unfolded, see page 51
The tine array is set to the shallowest working
depth, see page 64
1.
If the roller holder is not in the parking position
on the roller for single rollers,
Screw on the mount
1
for the roller holder onto
the roller.
2.
Insert the parking legs
3
of the roller holder into
the mount.
3.
Secure the parking legs with the linch pins
2
.
1
2
3
CMS-I-00004834
CMS-T-00009841-A.1
6 | Preparing the machine
Preparing the implement for operation
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
52