8.
Position the parked halves of the roller such
that the distance
A
between the two inner side
plates
1
of the two roller frames is 2 cm.
9.
With the help of a guide, drive the implement in
reverse over the parked halves of the roller such
that the distance
B
between the inner side plate
of the roller frame and the inner roller mount
2
are each 65.2 cm.
1
1
2
2
B
B
A
CMS-I-00006927
10.
If the implement is equipped with a rigid
drawbar,
Lower the implement with the tractor lower links
and with the "yellow" tractor control unit until the
roller mounts
2
are resting parallel on the roller
or
If the implement is equipped with a hydraulic
drawbar,
lower the implement with the "yellow" tractor
control unit using the running gear and the
drawbar stop tap opened as necessary, until the
roller mounts
2
are resting parallel on the roller.
11. Fasten the roller on the roller mounts with
clamping brackets
3
and bolted connections
1
.
12. Lift the implement completely, see page 50.
1
2
3
CMS-I-00006911
13.
If the roller is a single roller with mounted
roller holder,
Remove the linch pins
2
on the parking legs
3
of the roller holder.
14. Pull the parking legs out of the mount
1
.
15. Put the parking legs in parking position in the top
holes of the mount.
16. Secure the parking legs with linch pins.
1
2
3
CMS-I-00004835
6 | Preparing the machine
Preparing the implement for operation
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
56