WARNING
Danger of accident when traction
assistance is switched on
If the traction assistance is switched on
during road transport, the implement can
start rocking.
Switch off the traction assistance for road
transport.
Only activate the traction assistance when
working on the field.
1.
Open the stop tap
3
on the drawbar cylinder.
2.
Move the switch tap
1
of the traction assistance
to position "1".
3.
To increase or reduce traction assistance,
further screw in or screw out the screw
2
on the
pressure relief valve.
1
0
1
3
2
CMS-I-00006948
7.8 Lowering the implement
7.8.1 Lowering implements with rigid drawbar
1.
Put the tractor lower links in float position.
2.
When working with the roller,
actuate the "yellow" tractor control unit until the
piston rods of the running gear hydraulic cylinders
are retracted enough so that the cylinder tube
1
is resting on the stop plate
2
.
1
2
CMS-I-00006980
CMS-T-00010205-A.1
CMS-T-00009861-A.1
7 | Using the implement
Lowering the implement
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
72
