11.2 Manoeuvring the implement with pneumatic brake system
If the implement is uncoupled from the tractor, the
compressed air from the compressed air tank acts on
the brakes and the wheels are blocked. To be able
to move the uncoupled implement, the compressed
air that actuates the brakes must be vented with the
release valve.
WARNING
Risk of accident due to unbraked
implement
To manoeuvre the implement,
couple the implement to a suitable tractor
using the coupling device.
Manoeuvre the implement only at walking
speed.
1.
Press in the control knob
1
of the release valve
2
up to the stop.
The compressed air that acts on the brakes
escapes.
2.
Manoeuvre the implement.
3.
Pull out the control knob of the release valve up
to the stop.
Compressed air flows out of the compressed air
tank to the brakes again, and the wheels are
blocked.
NOTE
To brake the implement again, there must be
enough compressed air in the compressed air
tank.
4.
If there is not enough compressed air,
couple the pneumatic brake system to a tractor.
1
2
CMS-I-00004845
CMS-T-00006898-B.1
11 | Transporting the machine
Manoeuvring the implement with pneumatic brake system
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
107
